Sierra Natural Science 217C Mite Control
Description:
SNS 217 and SNS 217C are equally powerful in their effect on a spider mite population, which one you choose should only be dependent on your specific needs in your growing situation. Using food grade rosemary extracts and oils, these products will kill adult spider mites and prevent their eggs from hatching. The natural salts and fatty acids derived from the rosemary disrupt the insect cell structure and the permeability of its membranes; this will quickly cause the insect to dehydrate and die. Additionally, once eggs are coated with the oily liquid, their respiration will be blocked and they will perish without hatching. The plant will absorb some of the components of these products, which will the form a barrier to any additional mites that may try to feed on it.
- Can be used on delicate new growth, clones, tomatoes and roses.
- Exempt from EPA registration under minimum risk pesticides (FIFRA section 25b)
- No restricted entry level (REI)
- May be used up to the day prior to harvest.
- For preventative maintenance, spray on a 7-14 day schedule. Depending upon severity of infestation, several applications may be required. If needed, spray every 3-5 days until you have control of the problem.
- Complete coverage of all plant tissue (leaves, stems, stalk, fruit and around flower) is necessary for control. Make sure to spray thoroughly under the leaves where spider mites hide and lay their eggs.
- To reduce the chance of burning do not use under direct sunlight or grow lamps.
- No restricted entry level (REI).
- May be used up to the day prior to harvest.
- Mix contents of package, 6 oz. concentrate, with 32 oz. of water.
- To reduce the chance of burning, do not use under direct sunlight or grow lamps.
- Apply every 3-5 days, depending on the severity of infestation.
- Mixed solution may be stored for up to two weeks if not used immediately.
EX-ICUTE RAPID-O
Protect your plants from pests! We’ve formulated one of the best quality pesticides for organic farming. Fight pesky intruders from ruining your crops. Cultivate healthier harvests without the use of toxic chemicals. Nurturing plant health is difficult when pests start to invade your crops, but our powerful solution is on your side. Our expert formula allows you to maintain your organic farming methods while fighting invasive pests. EX-ICUTE is your safe pesticide option derived from natural ingredients.
Benefits of Organic
- Optimal plant health. Keep your plants protected against destructive pests, including insects and fungi. Prevent future infestations as well. Our pesticides allow you to stick to your organic farming methods while fighting against insects and other harmful pests.
- Safe for you and your family. It’s widely known that toxic pesticides can have negative impacts on your health. When crops are treated with harsh chemicals, it can adversely affect the health of the farmer, their family, and their surrounding community. Choose the safe option and avoid serious health effects. EX-ICUTE is made from safe and natural ingredients for worry-free farming.
- Environmentally friendly. Use an eco-friendly crop control treatment. Your crops are connected to the surrounding environment, including the soil, plant life, and nearby wildlife. Spraying crops with natural substances ensures that the surrounding environment isn’t harmed.
- More money in your pocket. If you lose your crops to pests, there’s no doubt it’ll have a huge impact on your profit. Organic farmers are faced with the tough decision of how to rid pests safely, but EX-ICUTE is the organic solution. Natural pesticides tend to be effective for a longer period of time compared to synthetic pesticides. Keep the pests away, keep your vegetables organic, and keep your money in your pocket!
Olivia’s Propagation Package
Save 10% by bundling all your propagation needs with this Olivia's Propagation Package
Each package will include the following
(8) Mammoth Start Plug Trays By providing growing media to support beginning phases of plant growth, MAMMOTH Starter Plugs make it easy to plant and grow. Plant seeds or clones in the pre-drilled holes, then water or mist, keep your humidity consistent, and transfer when ready. With 50-deep-cell trays of 65mm of media, there’s more media for root development – over 30% more than traditional trays. Mammoth Starter Plugs are made of a 50/50 mix of coco coir and sphagnum peat moss, providing ideal conditions for seeds or clones to start. No pre-conditioning is required – just plant and grow! (1) 1 gallon of Olivia's Cloning Solution Olivia’s Cloning Solution, just like its sister product Oliva’s Cloning Gel, was developed in the early 1990’s when the hydroponic industry was in its infancy. These products met the need for quality products then and continue to meet that same need today. This concentrated liquid contains a root stimulating plant hormone derived from the White Willow (Salix alba) tree, Indole-3 butyric acid, and NPK nutrients. These ingredients provide new cuttings what they need for a spectacular start and continued robust growth. This cloning solution works well for hydroponic and soil applications as well as with root cubes and cloning machines. It can be used daily to root and feed cuttings. (1) 8 ounce of Olivia's Cloning Gel Developed nearly 30 years ago, Olivia’s Cloning Gel continues to be an industry leader due to its high quality, ease-of-use and stellar results. The secret to its success is two-part: what’s in it and how it does what it does. It is made of a combination of a root-stimulating plant hormone (Indole-3 butyric acid) from the White Willow (Salix alba) tree and NPK nutrients formulated into a gel. This viscous gel adheres to cuttings quickly and completely to create a seal. This sealing process provides direct root stimulation and nutrition to the plant to get those roots going and eliminate transplant shock. Olivia’s Cloning Gel is designed to be opened and ready for use. It can be used for hydroponic or soil plantings and on all plants grown indoors and outdoors, including flowers, ornamentals, fruits and vegetables. For the very best results, use in conjunction with Olivia’s Cloning Solution. (8) 7" Mini Propagation Domes A professional propagation dome for starting seeds or cuttings. Temperature and humidity controlled by two adjustable vents for better growing results. Designed to provide more cubic volume for your growing plants. Constructed from heavy duty, high grade plastic to maximize light penetration and stand up to repeated use. Perfectly fitted for standard 10 x 20 trays, to create a tight seal and reduce moisture loss.
Lost Coast Plant Therapy
Description: Healthy plant protection. Effectively eliminate harmful insects and powdery mildew, without polluting the environment. Kill bugs on contact without using poison.
Active Ingredients: Soybean Oil, Peppermint Oil, Citric Acid, Water, Soap, Isopropyl Alcohol, Sodium Citrate
- 32 oz concentrate mixes with water to make 32 gallons of spray.
- 1 gallon concentrate mixes with water to make 128 gallons of ready to use spray.
- 2.5 gallon concentrate mixes with water to make 320 gallons of ready to use spray.
PyGanic Insecticide
Pyganic Gardening is made from Pyganic, a product created by the MGK® company more than 100 years ago. Using an extract of the daisy flower, Pyrethrin, as the active ingredient, the scientists at MGK were able to create an exceptional botanical insecticide. All these years later, Pyganic has become a trusted favorite of professional farmers and gardening experts everywhere.
Use Pyganic Gardening for rapid knockdown and quick kill of over 100 insect pests, from Ants to Yellow Mealworms. This easy-to-use organic liquid gets the job done without persisting in the environment and will even flush out those insects and mites that like to stay hidden.
- Made from botanically-derived active ingredient Pyrethrin.
- 8 ounces can make up to 8 gallons of spray and 32 ounces can make up to 32 gallons.
- OMRI listed (accepted for organic gardening).
- Can be used on most types of fruits & vegetables.
- Dilute 1-1.4 fluid ounces of PyGanic Gardening per gallon of water per 1,000 sq. ft.
- For larger gardens, apply 16-59 fluid ounces per acre by ground in sufficient water for thorough coverage. Do not exceed the maximum application rates of 1.4 fl. oz. of PyGanic Gardening per 1,000 sq. ft. or 59 fl. oz. per acre.
- Apply diluted solution with all types of agriculture sprayers, including compressed air sprayers or pump driven sprayers.
- Mix only enough for immediate use.
- Do not contaminate water, food or feed by storage or disposal.
- Keep this product in its tightly closed original container when not in use.
- Store in a cool, dry (preferably locked) area that is inaccessible to children and animals.
Trifecta Crop Control
Oil and water: two liquids that have never played well together… until now.
Other oil-based products require the addition of a surfactant or wetting agent to reduce the surface tension, which allows for more even coverage on the plant. Unfortunately, this requires constant and rigorous shaking which still does not result in a full even coverage.
Trifecta Crop Control’s unique high-shear homogenization process is so effective, it creates TOTAL emulsion of the oils in water, which means you do not need to mix with additional products. Just one product... an all-in-one solution. Click here to see how it compares to other products on the market.
Application Rate:
- 3 times/week
- 2 oz/gal
Monterey Garden Insect Spray
For use in organic gardening
For control of foliage feeding worms (caterpillars), leafminers, thrips, fire ants and other listed pests in: Lawns, Outdoor Ornamentals, Vegetables, Apples, Citrus and Store Fruit.
For residential use in home gardens, lawns, and ornamentals
NOTE: ONLY AVAILABLE for local pickup
Rid-Bugs Organic Insecticide
Biopesticide for Organic Production
- Completely natural and safe organic oil spray that rids plants of insects and diseases and it helps to prevent future infestation.
- Combats adult soft-bodied insects as well as eggs, larvae, and nymphs of insects.
- Effective against insects and mites such as (but not limited to) citrus rust mites, spider mites, two spotted mites, armored and soft scales, mealy bugs, whiteflies, aphids, leaf rollers, leaf miner, fungus gnats and thrips.
- Effective against fungal diseases such as (but not limited to) powdery mildew, black spot on roses, and greasy spot on citrus.Targets Pests: EFFECTIVE on eggs, larva, and nymphs of insects as well as, adult soft bodied insects. Controls a wide range of mites and insect pests such as (but not limited to) citrus rust mites, spider mites, two spotted mites, armored and soft scales, mealybugs, white flies, aphids, leafroller, leaf miner, fungus gnats and thrips. RID-BUGS controls certain fungal diseases such as (but not limited to) powdery mildew, black spot on roses and grease spot on citrus.
Humboldt County’s Own Sonic Bloom w/ B1 Vitamins 0-51-34
POWDERED SUNSHINE: WITH VITAMIN B1 and MORE!
Most Concentrated PK Booster on the market!
- 20 times the vitamin B1 of other popular bloom boosters
- Increases the size and mass of flowers.
- Stimulates resinous oil and fragrance production in many flowers and medicinal herbs.
- NO Dyes!
Works with all nutrient brands.
Soil and Hydro: Highly concentrated, use just 1 teaspoon per 5 gallons of water! Apply when you first see signs of flower development, usually around the 2nd week of bloom, and continue until a week before harvest. For best results continue to apply Snow Storm or Purple Maxx and Killer Tea during flush.Use Sonic Bloom OR Crystal Burst, not both!
Humboldt County’s Own Purple Maxx 0-0-3
Amino acid based cocktail that intensifies final color in susceptible varieties. No dies, no tricks. Don’t wait and hope. Get the color you want when it’s time to harvest. Customers say many new varieties respond very strongly and reliably to Purple Maxx.
Directions: This product usually causes a massive uptake of nutrients so fertilizer solution should be cut back by about 1/3
- Soil - This product usually causes a massive uptake of nutrients so fertilizer solution should be cut back by about 1/3. - (1): If you are close to the end of the flowering cycle it would be best to feed Purple Maxx without fertilizer. Use 1/2 to 1 tsp. of Maxx per gallon of water right up to the end. If you have good air circulation you can spray with 1/2 to 1 tsp/gallon. Some testers have used a lot more. If powdery mildew is an issue add Serenade to the mix. - (2): If you are just starting the bloom cycle, use 1/2 to 1 tsp. per gallon of water and apply about once a week or foliar feed with 2ml /gallon (1 tsp 2 1/2 gallons of water). If plants show no sign of tip burn, nutrient strength can be increased.
- Hydro - Purple Maxx works well in hydro at the rate of 2 1/2 to 5 ml / gallon. DO NOT USE AN AERATOR! It will cause bacterial contaminants that may be present in the reservoir to grow drastically although some testers have reported that problems can be controlled by adding 2-5 ml. of 35% hydrogen peroxide per gallon of water to the reservoir. Others have avoided problems by adding the Maxx 24-48 hours before reservoir change. The safest way is to use the foliar feed method as far into bloom as possible.
Humboldt County’s Own Snow Storm Ultra 0-0-3
With an amino acid profile unique in the industry, Snow Storm consistently produces intense resin, fragrance and flavor plus the well known “frosted", look that growers love. Works on all varieties. Not a carbohydrate or sugar water product. This is the real deal from “old school", Humboldt County.
Directions: It's important to not overfertilize. It's never necessary to run nutrient concentration above 1000 ppm.
- Soil - Start applying during the vegetative stage at the rate of 1/2 tsp. per gallon of water. Continue at this rate until 3 or 4 weeks into bloom and then increase to 1 tsp/gallon. The last 3 weeks of bloom the dose can be increased up to 2 tsp/gallon.
- Hydro - Use 1/2 tsp per gallon and run continuously. Be cautious if running nutrients over 800-1000 ppm. For example, running 5 ml/gallon at 1200 ppm can drop reservoir to 800 ppm in 24 hours. Some strains can take it, some can't.
- Foliar: Much more economical. Use 1/2 to 1 tsp per gallon of water and apply once a week. Use caution once flowers bulk up.
Humboldt County’s Own Deep Breath 0.1-1-1
This honey and vitamin based cocktail, “primes the pump", during the vegetative and early bloom stage so plants experience an explosive surge in bulk when G10 is applied. The DEEP BREATH/ G10 combo boosts yields to unheard of levels. Even beginners will see incredible effects in 2 weeks.
Directions:
- Soil - beginning in the vegetative stage use 5 ml (1 tsp) per gallon of water and apply every watering or every other watering and continue through the second week of bloom. Third week switch to G10 (Gravitation #10).
- Hydro - Use 2.5 to 5 ml. (1/2 to 1 tsp.) per gallon of water on the same schedule as above. If you're running a reservoir longer than 5 days, add an extra 2.5 ml./gallon of water after 5 days. Third week switch to G10 (Gravitation #10)
Bluelab pH Pen
Perfect for quick and easy pH and temperature readings direct from your solution. The Bluelab® pH Pen is the preferred option for hand held pH meters. It provides a compact, quick and handy way to manage the success of your crops to ensure maximum uptake of nutrients.
A key parameter that affects nutrient uptake is whether your solution is acid or alkaline, which is measured in pH. Teamed with our Bluelab® Conductivity Pen you have a robust, convenient and accurate measurement system.
pH Pen Features:
- Measures pH and temperature with selectable units for °C and °F
- Backlit LCD display
- Double junction probe (not replaceable)
- Successful calibration indicator
- Hold reading function and low battery warning
- Fully waterproof with auto off function and automatic temperature compensation
- Bluelab pH Probe KCI Solution, Bluelab pH 7 and Bluelab pH 4 Solution Sachets included
- Range: 0.0–14.0 pH/0–50°C/32°–122°F
- Resolution: 0.1 pH/1°C/1°F
- Accuracy @ 25°C: ±0.1 pH
- Battery type: 1 x AAA alkaline.
Bluelab In-Line pH Probe
Replacement probe only - Bluelab Guardian Monitor Connect In-Line sold separately
Threaded probe heads allow for simple installation direct into an irrigation line for effective in-line measurements. Suitable for use before or after mechanical injectors.
Both conductivity and pH probes can screw directly into female 1” NPT pipe fittings on monitor using the adapter included in monitor kit.
In-line pH probe cable length: 3 meters / 10 feet
Select options
1Only 1 left!
Bluelab In-Line Monitor
The Bluelab Guardian Monitor Connect In-Line is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you. It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark for crop success. For remote or cloud access, the computer you are already data logging to will need permanent internet access.
Threaded probe heads allow for simple installation direct into an irrigation line for effective in-line measurements. Suitable for use before or after mechanical injectors. Both conductivity and pH probes can screw directly into female 1” NPT pipe fittings using the included adapter.
Teamed with the Bluelab® Connect™ Stick, you get all the convenience of wireless data logging and remote alerts.
Monitor Features:
• pH and EC in-line threaded probes to fit into in-line plumbing
• Remote viewing with Bluelab® Connect™ Software and Apps
• Replaceable double junction high pressure pH probe included
• Bright, plant-safe green LED with adjustable brightness
• Easy to navigate menu to program & adjust settings
• Selectable conductivity and temperature scales
• Simple push button pH calibration
• No calibration required for conductivity and temperature (factory calibrated)
• Flashing high and low alarms (non-audible)
For more information, see Data Sheet and Instructions.
Select options
12Only 12 left!
Bluelab Conductivity Pen
The Bluelab® Conductivity Pen simply tells you the amount of nutrient in your solution. Conductivity is automatically compensated with the integrated temperature sensor, providing a compact, quick and accurate way to measure two key parameters for crop health.
Teamed with our Bluelab® pH Pen you have a robust, convenient and accurate measurement system.
Conductivity Pen Features:
- Measures conductivity and temperature with selectable units for conductivity and temperature
- Backlit LCD display with low battery warning
- Successful calibration indicator and calibration is optional
- Fully waterproof with auto off function and hold reading function and automatic temperature compensation
- Units: EC, 500 ppm, 700ppm, ºC, ºF
- Range: 0.0–10.0 EC, 0–5000 ppm (500 ppm), 0–7000 ppm (700 ppm) and 0–50ºC/32–122ºF
- Resolution: 0.1 EC, 10 ppm (500 ppm), 10 ppm (700 ppm) and 1ºC/1ºF
- Accuracy @ 25ºC: ±0.1 EC (@ 2.77 EC), ±50 ppm (500 ppm) (@ 1385 ppm), ±70 ppm (700 ppm) (@ 1940 ppm) and ±1ºC / ±2ºF
- Battery type: 1 x AAA alkaline
Select options
7Only 7 left!
Aeromixer Pump
Aeromixer is a pump made specifically for growers, by growers, with a dual purpose: to mix nutrients and aerate feeding solutions with just one pump. Aeromixer makes feeding large and smaller gardens a breeze and reduces the need for air stones, air pumps, and pH up and down additives.
Aeromixer Standard and Tall Specifications
- 3/4 horsepower motor
- Moves 4,450 gallons per hour
- Easily mixes tanks from 50-500 gallons (effective up to 3,000 gallons)
- Max height: 40 ft
- Max Submersion Depth: 17 ft
- Instructions
- 1/6 horsepower motor
- Moves 1,600 gallons per hour
- Easily mixes 15+ gallon tanks
- Max height: 20 ft
- Max Submersion Depth: 23 ft
- Instructions
Earth Juice PH Up
Cover Crop
Cover Crop Description:
Our cover crop is a 100% organic Soil building blend that contains a mix of Biomaster Peas,
Common Vetch, Purple Vetch, Dunsdale Peas, Cayuse Oats and Lana Woolypod Vetch.
Cover crop will fix atmospheric nitrogen into the soil, help with weed competition and erosion
control and provides green manure to incorporate back into your soil.
Application Rates:
3lbs per 1,000 sq. ft.
*One 50lb bag @ 2.5lb app rate, covers roughly 1/2 acre OR 20,000 sq ft.*
Germination: 5-10 Days
Estimated Cover Crop Height: 3-5ft.
Chop and Drop Information:
The biology in the Chop and Drop Protocol will help speed up the decomposition process of the
biomass produced by the cover crop. You will want to chop down you cover crop and drop it in
Chop and Drop Formula:
Tainio Biodigester – 0.035 mL per gallon
Pac Grow Oceanic Hydrolysate- 10 mL per gallon (Shake prior to measuring!)
Rhizothrive BioStimulant- 5 mL per gallon
Yucca – 2 mL per gallon
Tainio Pepzyme Clear- 1mL per gallon
Chop and Drop Protocol:
Add mixture to your water storage.
Allow mixture to activate ideally with aeration for about 5-10 minutes prior to applying to your
chopped and dropped cover crop. Once mixture has been activated, spray down your dropped
cover crop. We recommend 600 gallons of solution to treat 10K sq ft
Optional and recommend*:
Apply a layer of organic rice straw to insulate your microbes.
Dosatron D40MZ3000
Dosatron water-powered, non-electric chemical injectors are the easiest, most reliable way to accurately inject chemicals into water lines. Dosatron injectors work using volumetric proportioning, ensuring that the chemical mixture remains the same regardless of variations in pressure and flow.
When water enters the injector, it triggers the hydraulic motor, which begins moving up and down inside the body of the injector. On the up stroke, the Dosatron draws fluid up from the concentrate tank in an action similar to a hypodermic syringe. On the down stroke, the concentrate is displaced into the mixing chamber, where it is mixed with the water flowing through the unit. Then the water-and-chemical mixture is discharged into the water lines.
The Dosatron D40MZ3000, with flow up to 40 gpm, can be installed in parallel to increase the water flow. It’s water-powered so no electricity is needed, and it’s easy to install and maintain. 63% fewer parts, metal free piston.
Specifications: Dilution Range: 1:3000 to 1:500 (0.03% to 0.2%) Water Flow Range: 2.2 to 40 gpm Operating Pressure Range: 43 to 116 psi Dimensions: 25 1/4" x 8 1/2" Weight: 12 lbs Connection Size: 1 1/2" NPT For more information, see Instructions
Dosatron D40MZ2
Dosatron water-powered, non-electric chemical injectors are the easiest, most reliable way to accurately inject chemicals into water lines. Dosatron injectors work using volumetric proportioning, ensuring that the chemical mixture remains the same regardless of variations in pressure and flow.
When water enters the injector, it triggers the hydraulic motor, which begins moving up and down inside the body of the injector. On the up stroke, the Dosatron draws fluid up from the concentrate tank in an action similar to a hypodermic syringe. On the down stroke, the concentrate is displaced into the mixing chamber, where it is mixed with the water flowing through the unit. Then the water-and-chemical mixture is discharged into the water lines.
The Dosatron D40MZ2, with flow up to 40 gpm, can be installed in parallel to increase the water flow. It’s water-powered so no electricity is needed, and it’s easy to install and maintain. 63% fewer parts, metal free piston.
Specifications: Dilution Range: 1:500 to 1:50 (0.2% to 2%) Water Flow Range: 2.2 to 40 gpm Operating Pressure Range: 43 to 116 psi Dimensions: 25 1/4" x 8 1/2" Weight: 12 lbs Connection Size: 1 1/2" NPT For more information, see Instructions
Select options
10Only 10 left!
Dosatron D14MZ3000
Dosatron water-powered, non-electric chemical injectors are the easiest, most reliable way to accurately inject chemicals into water lines. Dosatron injectors work using volumetric proportioning, ensuring that the chemical mixture remains the same regardless of variations in pressure and flow.
When water enters the injector, it triggers the hydraulic motor, which begins moving up and down inside the body of the injector. On the up stroke, the Dosatron draws fluid up from the concentrate tank in an action similar to a hypodermic syringe. On the down stroke, the concentrate is displaced into the mixing chamber, where it is mixed with the water flowing through the unit. Then the water-and-chemical mixture is discharged into the water lines.
The Dosatron D14MZ3000, with flow up to 14 gpm, can be installed in parallel to increase the water flow. It’s water-powered so no electricity is needed, and it’s easy to install and maintain.
Specifications: Dilution Range: 1:3000 to 1:333 (0.03% to 0.3%) Water Flow Range: 0.05 to 14 gpm Operating Pressure Range: 4.3 to 85 psi Dimensions: 21" x 6 5/16" Weight: 6 lbs Connection Size: 3/4" NPT For more information, see Instructions
Organics Alive 4 Gallon Bio-Extractor
The Organics Alive Bio-Extractor is not a conventional compost tea brewer. The patented internal structures, cavitation process, and oxygen diffuser are engineered and fabricated for an effective fluid dynamics extraction and multiplication process. The fluid dynamics of the Bio-Extractors are engineered specifically for the extraction of the Organics Alive Mix Kits.
There are several extensive differences that set this apart from a conventional brewer. The first important element to the Organics Alive Bio-Extractor is the oxygen diffuser. The diffuser does not allow biology or biofilms to stick or attach. Any diffuser with a porous nature, such as a rock stone or a simple air tube, will hinder biological growth and multiplication. This diffuser pushes air at 6ppm oxygen diffusion, creating course and fine bubbles made to agitate and extract the biology from the cultured Mix-Kit and rapidly multiply aerobic beneficial microorganisms. The patented chimney holds the Mix-Kit at a specifically tested and engineered level for perfect cavitation. This allows an extraction and feeding process which multiplies the biology 9 billion times in 24 hours. The tea becomes extremely active, alive, and concentrated. The amount of biology in one gallon of brew equates to 2000Ibs of Organics Alive worm castings. The Organics Alive Bio-Extractor is very easy to clean, runs efficiently and quietly. It is designed to be brewed at room temperature in your home or garden.
Military Green Zip Up Hoodie
Cream Long Sleeve Tee Shirt
White Tee Shirt
Army Green Women’s Tee
Heather Gray Women’s Jersey Tank
Light Gray Women’s Drapey Tank
Insect Identification
Analysis includes identification of insects in plant tissue, roots or soil.
Please send samples in accordance with where you're experiencing issues ie. plant tissue, soil, roots, etc
Note: Testing will only come with the test results. We strongly recommend a follow up consultation once results are received.
For additional review of materials please purchase 'Plus Half Hour Consultation" option from the field below.
With this consultation the test results will be reviewed in detail with one of our professionals. We will follow up to schedule a consultation within 48 hours of receiving your results if the selection was made.