| Weight | 25 lbs |
|---|---|
| Dimensions | 24 × 24 × 24 in |
Blacksmith Bioscience Warhammer $38.22 – $254.16
Bene-Bio (Advanced Growth Formula) $332.99 – $629.10
GRUNDFOS CMBE 10-54 BOOSTER PUMP
$3,595.00
The CMBE 10-54 Booster is designed for domestic and commercial water supply, pressure boosting, irrigation and dewatering applications.
The CMBE series is available in 1×200-240V variants and uses energy efficient, permanent magnet motor technology, which provides unmatched reliability, quiet operation, and energy savings.
Thanks to the integrated speed controller, the CMBE keeps a constant pressure in the pipe system. A pressure sensor monitoring discharge pressure will signal to the speed controller to change the motor speed to adapt the performance to the new situation.
Features:
- Constant pressure via integrated speed control
- Compact design
- Robust, stainless steel design
- Easy installation
- Low energy consumption
- Dry-running protection
- Noise level below 55 dBA and even lower at controlled speed
The CMBE Booster is a complete pump system preassembled with the following components:
- CME pump with integrated frequency converter
- 5-way fitting with non-return valve
- Diaphragm tank
- Pressure gauge
- Pressure sensor
The simple control panel features the GRUNDFOS Eye that indicates system status, warnings and alarms. Adjusting to the desired setpoint is easy using the one-touch control buttons. The light fields on the control panel will indicate the setpoint setting.
Additionally, you can use the Grundfos GO App to communicate with the CBME. Grundfos GO is gives you intuitive handheld pump control, and full access to all the Grundfos Online tools on the go.
Download the free Grundfos GO App available on the App Store and Google play.
If you are a client with a special tax exemption (ie. Resale, Amendment or Ag Exemption) please contact our Office directly at (707) 273-8758 to place your order. We are not able to honor your exemptions for online orders at this time. If you have a special tax exemption, we are unable to adjust past sales tax should you place an order online.
Additional information
Shipping & Delivery
Aeromixer Pump
Aeromixer is a pump made specifically for growers, by growers, with a dual purpose: to mix nutrients and aerate feeding solutions with just one pump. Aeromixer makes feeding large and smaller gardens a breeze and reduces the need for air stones, air pumps, and pH up and down additives. Aeromixer Standard and Tall Specifications
- 3/4 horsepower motor
- Moves 4,450 gallons per hour
- Easily mixes tanks from 50-500 gallons (effective up to 3,000 gallons)
- Max height: 40 ft
- Max Submersion Depth: 17 ft
- Instructions
- 1/6 horsepower motor
- Moves 1,600 gallons per hour
- Easily mixes 15+ gallon tanks
- Max height: 20 ft
- Max Submersion Depth: 23 ft
- Instructions
Netafim 10″ Netbow
NetBow™ is an innovative, user friendly container irrigation ring with multi-outlet emitters. Featuring Typhoon™, our superior clog resistant emitter for maximum water distribution. Specially designed for irrigating containerized crops. With NetBow™, roots develop in every square inch of the container including the top layer, where root development is critical, ensuring your crops reach their full growth potential and guarantees better ROI.
Bluelab Conductivity Pen
The Bluelab® Conductivity Pen simply tells you the amount of nutrient in your solution. Conductivity is automatically compensated with the integrated temperature sensor, providing a compact, quick and accurate way to measure two key parameters for crop health. Teamed with our Bluelab® pH Pen you have a robust, convenient and accurate measurement system. Conductivity Pen Features:
- Measures conductivity and temperature with selectable units for conductivity and temperature
- Backlit LCD display with low battery warning
- Successful calibration indicator and calibration is optional
- Fully waterproof with auto off function and hold reading function and automatic temperature compensation
- Units: EC, 500 ppm, 700ppm, ºC, ºF
- Range: 0.0–10.0 EC, 0–5000 ppm (500 ppm), 0–7000 ppm (700 ppm) and 0–50ºC/32–122ºF
- Resolution: 0.1 EC, 10 ppm (500 ppm), 10 ppm (700 ppm) and 1ºC/1ºF
- Accuracy @ 25ºC: ±0.1 EC (@ 2.77 EC), ±50 ppm (500 ppm) (@ 1385 ppm), ±70 ppm (700 ppm) (@ 1940 ppm) and ±1ºC / ±2ºF
- Battery type: 1 x AAA alkaline
Bluelab pH Pen
Perfect for quick and easy pH and temperature readings direct from your solution. The Bluelab® pH Pen is the preferred option for hand held pH meters. It provides a compact, quick and handy way to manage the success of your crops to ensure maximum uptake of nutrients. A key parameter that affects nutrient uptake is whether your solution is acid or alkaline, which is measured in pH. Teamed with our Bluelab® Conductivity Pen you have a robust, convenient and accurate measurement system. pH Pen Features:
- Measures pH and temperature with selectable units for °C and °F
- Backlit LCD display
- Double junction probe (not replaceable)
- Successful calibration indicator
- Hold reading function and low battery warning
- Fully waterproof with auto off function and automatic temperature compensation
- Bluelab pH Probe KCI Solution, Bluelab pH 7 and Bluelab pH 4 Solution Sachets included
- Range: 0.0–14.0 pH/0–50°C/32°–122°F
- Resolution: 0.1 pH/1°C/1°F
- Accuracy @ 25°C: ±0.1 pH
- Battery type: 1 x AAA alkaline.
Bluelab In-Line Monitor
The Bluelab Guardian Monitor Connect In-Line is not only a constant indicator of the desired levels of pH, conductivity and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you. It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark for crop success. For remote or cloud access, the computer you are already data logging to will need permanent internet access. Threaded probe heads allow for simple installation direct into an irrigation line for effective in-line measurements. Suitable for use before or after mechanical injectors. Both conductivity and pH probes can screw directly into female 1” NPT pipe fittings using the included adapter. Teamed with the Bluelab® Connect™ Stick, you get all the convenience of wireless data logging and remote alerts. Monitor Features: • pH and EC in-line threaded probes to fit into in-line plumbing • Remote viewing with Bluelab® Connect™ Software and Apps • Replaceable double junction high pressure pH probe included • Bright, plant-safe green LED with adjustable brightness • Easy to navigate menu to program & adjust settings • Selectable conductivity and temperature scales • Simple push button pH calibration • No calibration required for conductivity and temperature (factory calibrated) • Flashing high and low alarms (non-audible) For more information, see Data Sheet and Instructions.
Dosatron D14MZ3000
Dosatron water-powered, non-electric chemical injectors are the easiest, most reliable way to accurately inject chemicals into water lines. Dosatron injectors work using volumetric proportioning, ensuring that the chemical mixture remains the same regardless of variations in pressure and flow. When water enters the injector, it triggers the hydraulic motor, which begins moving up and down inside the body of the injector. On the up stroke, the Dosatron draws fluid up from the concentrate tank in an action similar to a hypodermic syringe. On the down stroke, the concentrate is displaced into the mixing chamber, where it is mixed with the water flowing through the unit. Then the water-and-chemical mixture is discharged into the water lines. The Dosatron D14MZ3000, with flow up to 14 gpm, can be installed in parallel to increase the water flow. It’s water-powered so no electricity is needed, and it’s easy to install and maintain.
Specifications: Dilution Range: 1:3000 to 1:333 (0.03% to 0.3%) Water Flow Range: 0.05 to 14 gpm Operating Pressure Range: 4.3 to 85 psi Dimensions: 21" x 6 5/16" Weight: 6 lbs Connection Size: 3/4" NPT For more information, see Instructions
Dosatron D40MZ3000
Dosatron water-powered, non-electric chemical injectors are the easiest, most reliable way to accurately inject chemicals into water lines. Dosatron injectors work using volumetric proportioning, ensuring that the chemical mixture remains the same regardless of variations in pressure and flow. When water enters the injector, it triggers the hydraulic motor, which begins moving up and down inside the body of the injector. On the up stroke, the Dosatron draws fluid up from the concentrate tank in an action similar to a hypodermic syringe. On the down stroke, the concentrate is displaced into the mixing chamber, where it is mixed with the water flowing through the unit. Then the water-and-chemical mixture is discharged into the water lines. The Dosatron D40MZ3000, with flow up to 40 gpm, can be installed in parallel to increase the water flow. It’s water-powered so no electricity is needed, and it’s easy to install and maintain. 63% fewer parts, metal free piston.
Specifications: Dilution Range: 1:3000 to 1:500 (0.03% to 0.2%) Water Flow Range: 2.2 to 40 gpm Operating Pressure Range: 43 to 116 psi Dimensions: 25 1/4" x 8 1/2" Weight: 12 lbs Connection Size: 1 1/2" NPT For more information, see Instructions
